Loadcalc 2008 Panel Schedule 1.1.4

Loadcalc 2008 performs panel schedules and service and feeder load calculations for commercial occupancies and single family dwellings. It also prints panelboard directories in two sizes (4x6 inch and 6x8 inch) for inside the panelboard doors or covers. The 2008 National Electrical Code is fully supported. Panel Schedules:Single or three phase.Commercial or residential.Load calculations and demand factoring according to occupancy type. Service/feeder load calculations for single dwelling unitsStandard Calculation Method (NEC Article 220), Optional Calculation Method (NEC Article 220-30), and Additional Loads in Existing Dwelling Units Calculation Method (NEC Article 220-31). Calculates net computed load in VA and amperes, and calculates the total service entrance load.Panelboard Directories: Prints directories for the inside of panelboard doors.Standard Calculation MethodDemand Factoring:General Lighting, Small Appliance and Laundry Loads.Cooktop, Range, Wall Oven.Fixed Appliances.Largest Motor Load. Optional Calculation MethodDemand factoring of 'other loads' as per NEC 220-30.Allows input of heating system type as per NEC Table 220-30, automatically determines the larger of heating or cooling load. Additional Loads In Existing Dwelling UnitsLoad calculations for existing dwelling units presently served by a 120/240 volt or 120/208Y service. Quick Reference Tables From The 2008 NECCan be viewed on screen or printed. File Save/LoadSave individual data files for later recall.Specify default data directoryInput up to four lines of data which will print at the top of your report. Print Preview & Printed ReportsPrint preview screens show reports as they will print.Professional, detailed printed reports.

PCWin Note: Loadcalc 2008 Panel Schedule 1.1.4 download version indexed from servers all over the world. There are inherent dangers in the use of any software available for download on the Internet. PCWin free download center makes no representations as to the content of Loadcalc 2008 Panel Schedule version/build 1.1.4 is accurate, complete, virus free or do not infringe the rights of any third party. PCWin has not developed this software Loadcalc 2008 Panel Schedule and in no way responsible for the use of the software and any damage done to your systems. You are solely responsible for adequate protection and backup of the data and equipment used in connection with using software Loadcalc 2008 Panel Schedule.

Platform: Windows 95, Windows, Windows 98, Windows Me, Windows NT, Windows 2000, Windows XP, Windows 2003, WinNT 3.x,Windows Vista Starter,Windows Vi

Category: Business & Finance / Project Management

Download | Homepage | Report Error