PDSYMS DWG Symbols Library

Demo

PDSYMS v2.

PDSYMS v2.0 is an Architectural/Interiors DWG-FORMAT Symbols Library Add-on for all CADD packages running on all platforms and Operating Systems, including but notlimited to:IntelliCAD (2000 and higher), Microstation, eCADlite, CADvance, TurboCAD,...

PDSYMS DXF Symbols Library

Demo

PDSYMS v2.

PDSYMS v2.0 is an Architectural/Interiors DXF-FORMAT Symbols Library Add-on for all CADD packages running on all platforms and Operating Systems, including but notlimited to:IntelliCAD (2000 and higher), Microstation, eCADlite, CADvance, TurboCAD,...

progeCAD Professional 2008 DWG CAD

Shareware

AutoCAD functionality at less than tenth the cost.

AutoCAD functionality at less than tenth the cost. DWG DXF PDF read write. Similar icons, commands and interface. Raster image embedding, raster-to-vector software included. DWF publishing, IntelliCAD AutoLISP interpreter, ACIS 3D Solids...

progeCAD Professional 2008

Shareware

AutoCAD functionality at less than tenth the cost. DWG DXF PDF read write. Similar icons, commands and interface. Raster image embedding, raster-to-vector software included. DWF publishing, IntelliCAD AutoLISP interpreter, ACIS 3D Solids modelling.

AutoCAD functionality at less than tenth the cost. DWG DXF PDF read write. Similar icons, commands and interface. Raster image embedding, raster-to-vector software included. DWF publishing, IntelliCAD AutoLISP interpreter, ACIS 3D Solids...

MITCalc - Pinned couplings

Shareware

The calculation is intended for the geometric design and strength check of couplings using pins and clevis pins.

The calculation is intended for the geometric design and strength check of couplings using pins and clevis pins. The program is used to solve the following tasks: design of pin for spring attachment, design of couplings with securing pins, design...

MITCalc3D for Solid Edge

Shareware

MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines.

MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical...

MITCalc - Worm Gear Calculation

Shareware

Geometric design and strength check of worm gear.

Geometric design and strength check of worm gear. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks:- Calculation of gearing dimensions. - Automatic transmission...

MITCalc - Rolling Bearings Calculation III

Shareware

This calculation can be used for the selection, calculation and check of rolling bearings of the company FAG, INA.

This calculation can be used for the selection, calculation and check of rolling bearings of the company FAG, INA. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. The document includes a...

MITCalc - Shaft connection

Shareware

Geometric designs and strength checks of shaped connections of shafts with hubs (keys, splines). Application supports Imperial and Metric units, is based on ANSI, ISO, DIN BS, JIS standards and support many 2D CAD systems

Geometric designs and strength checks of shaped connections of shafts with hubs. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Design of a connection with...

MITCalc - Tension Springs

Shareware

The calculation is intended for the purposes of geometric and strength designs of helical tension cylindrical springs made of wires and rods of circular sections, loaded with static loading.

The calculation is intended for the purposes of geometric and strength designs of helical tension cylindrical springs made of wires and rods of circular sections, loaded with static loading. . Application is developed in MS Excel, is...

MITCalc - Shafts Calculation

Shareware

The calculation is designed for geometrical design and complex strength check of shafts. Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems

The calculation is designed for geometrical design and complex strength check of shafts. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Simple definition of...

MITCalc - Roller Chains Calculation

Shareware

Geometrical design and strength check of common chain transmissions using roller chains.The application works with many 2D and 3D CAD systems and includes corresponding databases of roller chains from ANSI/ASME, ACA, ISO, DIN, BS and JIS.

The calculation is designed for a geometrical design and strength check of common chain transmissions using roller chains. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following...

MITCalc3D for SolidWorks

Shareware

This multi-language calculation package includes solutions for gearing, belt, chain, springs, beam, shaft, and many others. MITCalc support 2D and 3D CAD systems, Imperial and Metric units and many international standards (ANSI, ISO, DIN….).

MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical...

MITCalc3D for Autodesk Inventor

Shareware

This multi-language calculation package includes solutions for gearing, belt, chain, springs, beam, shaft, and many others. MITCalc support 2D and 3D CAD systems, Imperial and Metric units and many international standards (ANSI, ISO, DIN….).

MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical...

MITCalc

Shareware

This multi-language calculation package includes solutions for gearing, belt, chain, springs, beam, shaft, and many others. MITCalc support 2D (and 3D) CAD systems, Imperial and Metric units and many international standards (ANSI, ISO, DIN….).

MITCalc is a multi-language set of mechanical, industrial and technical calculations for the day-to-day routines. It will reliably, precisely, and most of all quickly guide customer through the design of components, the solution of a technical...

MITCalc - Internal Spur Gear Calculation

Shareware

Geometric design and strength check of internal spur gear with straight and helical toothing.

Geometric design and strength check of internal spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units and solves the following main tasks: - Calculation of...

MITCalc - Rolling Bearings Calculation I

Shareware

Selection, calculation and check of rolling bearings of the company SKF. Application supports Imperial and Metric units, is based on SKF, ISO, ANSI, SAE standards and support many 2D and 3D CAD systems

This module can be used for the selection, calculation and check of rolling bearings of the company SKF. The programme provides solutions to the following tasks: - Selection and check of a suitable bearing. The document includes a database of...

MITCalc - Torsion Springs

Shareware

Geometric and strength designs of spiral cylindrical torsion springs loaded with static or cyclic loading. Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems.

The calculation is intended for the purposes of geometric and strength designs of spiral cylindrical torsion springs made of wires and rods in circular sections, cold formed, loaded with a static or cyclic loading. Application is developed in...

MITCalc - Compression Springs

Shareware

Geometric and strength designs of helical compression cylindrical springs loaded with static or fatigue loading. Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems.

The calculation is intended for the purposes of geometric and strength designs of helical compression cylindrical springs made of wires and rods of circular sections, loaded with static or fatigue loading. Application is developed in MS Excel,...

MITCalc - Timing Belts Calculation

Shareware

Geometric design and strength check of toothed belt transmissions. Application contain a database of timing belts, supports Imperial and Metric units, is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and 3D CAD systems.

The calculation is designed for a geometrical design and strength check of toothed belt transmissions. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following main tasks: - Selection...