Free Downloads: Programming Disk Controller
Shareware
CHWFlow is a Disk speed Controller, including writing speed and reading speed.This software supports two different modes to control your Disk speed. One is "PROCESS" mode----it can monitor and display the real-time read/write speed of every process; The other is "PATH" mode----it can do the same as "PROCESS" mode for every path you selected.Besides the functions above,the...
Category: Utilities / File & Disk Management
Publisher: CHWSoft, License: Shareware, Price: USD $200.00, File Size: 5.1 MB
Platform: Windows
WinScript Live is the programming software for the V16Pro Show Controller.
WinScript Live is the Programming software for the V16Pro Show Controller.
Features:
-Support for unsolicited incoming messages;
-Real-Time Clock;
-Edit Scripts while running;
-New variable types;
-Many New Operator types;
-Wide range of Ethernet protocols;
-Real time Scheduler.
Category: Business & Finance / Business Finance
Publisher: Alcorn McBride Inc, License: Demo, Price: USD $0.00, File Size: 66.9 MB
Platform: Windows
PIDWell provides six structures of universally used PID controllers.
PIDWell provides six structures of universally used PID controllers.
1. General PID Controller
2. PID Controller with Integration Separation
3. Anti-Windup PID Controller
4. PID Controller with Partial Differential
5. PID Controller with Differential in Advance
6. PID Controller with Dead Zone
In addition to the classical...
Category: Home & Education / Science
Publisher: majorfeeling.com, License: Shareware, Price: USD $50.00, File Size: 334.0 KB
Platform: Windows
The VS16 SHOW DESIGNER software allows the preparation and Programming of Controller and Sequencers VS16. Visual and graphic, it also allows the simulation running on PC and view the shots of your show. Enter the time or lap times, position your sequencers on an image of your shooting site, select lines to activate and simulate in record time your show.
The simulation may be...
Category: Multimedia & Design / Multimedia App's
Publisher: Vegaelec, License: Demo, Price: USD $0.00, File Size: 2.5 MB
Platform: Windows
ZeelProg PDCI-20V is a programmable DC-CDI and PV controller.
ZeelProg PDCI-20V is a programmable DC-CDI and PV Controller.
Main Features:
- timing calculation for every 1 RPM change (1000, 1002, .. , 9805, 9806)
- PV error detecting (position sensor failure, servo motor failure)
- instant monitoring of rev's and angle, via LCD(hand held programmer)
- easy and fast Programming on the field, via hand...
Category: Software Development / Misc. Programming
Publisher: ZEELTRONIC, License: Freeware, Price: USD $0.00, File Size: 443.3 KB
Platform: Windows
The NanoJ easy Programming language based on Java can be used to store complete sequential controls in the SMCI33, SMCP33, SMCI47-S-2 positioning controls and the Plug & Drive motors of the PDx-N series.
The integrated Programming language NanoJ, based on the Java standard, means complete application programs can be realized on the drivers that can be executed...
Category: Utilities / Misc. Utilities
Publisher: Nanotec Electronic GmbH Co. Kg, License: Freeware, Price: USD $0.00, File Size: 0
Platform: Windows
Updates Workbench with latest fixes.
Updates Workbench with latest fixes. Sixnet ISaGRAF Programming gives you all five IEC 61131-3 standard Programming languages: Sequential Function Chart, Ladder Diagram, Structured Text, Instruction List and Function Block Diagram. In addition, it also supports Flow Chart Programming. Use just about any combination of these Programming languages to write a control...
Category: Utilities / Misc. Utilities
Publisher: SIXNET, License: Freeware, Price: USD $0.00, File Size: 3.1 MB
Platform: Windows
This is the full version of Lennox' Unit Controller Software.
This is the full version of Lennox' Unit Controller Software. No existing version of this software is required. The Unit Controller Software allows you to configure, troubleshoot and test Lennox® control devices, including the latest Integrated Modular Controller (M1-8 IMC), as well as Building Controllers, Comfort Sensors, etc.
Category: Utilities / Misc. Utilities
Publisher: Lennox Industries, Inc., License: Freeware, Price: USD $0.00, File Size: 23.0 MB
Platform: Windows
Faraduino is an open source Controller board with built in motor drivers and servo connectors, ideal for robotics. It's fully compatible with the open source Arduino platform that is taking the world by storm, so there is already a wealth of information available to you (see www.arduino.cc). You can use the excellent Arduino Programming software to download...
Category: Utilities / Misc. Utilities
Publisher: Flowino, License: Freeware, Price: USD $0.00, File Size: 70.4 MB
Platform: Windows
With EasyMotion Studio you can fully benefit from a key advantage of Technosoft drives/motors – their capability to execute complex motion without requiring an external motion Controller, thanks to their built-in motion Controller. EasyMotion Studio includes EasySetUp for the drive/motor setup, and a Motion Wizard for the motion Programming. The Motion Wizard provides...
Category: Software Development / Misc. Programming
Publisher: Technosoft, License: Demo, Price: USD $0.00, File Size: 33.0 MB
Platform: Windows
Chipmunk A/V Controller is a .
Chipmunk A/V Controller is a .NET Windows application for controlling your A/V equipment, Home Cinema, and performing general automation tasks.
Chipmunk enables you to create sophisticated macros and commands to control your devices via plugins, and receive incoming events.
Category: Internet / Misc. Plugins
Publisher: Home Cinema Solutions Ltd, License: Freeware, Price: USD $0.00, File Size: 4.8 MB
Platform: Windows
The AX100 is a stand-alone single reader controller, supplied with plug and play Windows software.
The AX100 is a stand-alone single reader Controller, supplied with plug and play Windows software. The compact Controller supports up to 4,000 cardholders with cards being added or deleted using the easy-to use Windows software. The powerful SQL-based software includes over 60 database fields including cardholder photographs and ,details.
Although communication is to...
Category: Internet / Communications
Publisher: Axxess Identification ltd., License: Freeware, Price: USD $0.00, File Size: 68.3 MB
Platform: Windows
Midi Controller featuring 8 Faders and a unique X/Y grid controller
The Virtual Fader Master is a MIDI Control Program written for Windows XP using the latest in software design and Programming techniques. Inspired by the legendary J.L. Cooper Fader Master, this program improves on the original in several significant ways and gives MIDI Musicians a new, powerful tool for controlling sequencers and synthesizers. Some of the programs features are: 8...
Category: Audio
Publisher: L and L's Software Delicatessen, License: Demo, Price: USD $10.00, File Size: 345.8 KB
Platform: Windows
The RI-1 is a single board low cost repeater controller.
The RI-1 is a single board low cost repeater Controller. It supports a full duplexed link or repeater ports and can be connected to the RI-300 auxiliary buss. As a repeater port, it can operate completely independent with its own command processor. The RI-1 can be assigned to any channel on the auxiliary buss. Demo Programming Software for the RI-1 and RI-300/310.
Category: Business & Finance / Business Finance
Publisher: Pacific Research Solutions, License: Demo, Price: USD $0.00, File Size: 7.2 MB
Platform: Windows
Dante Controller software allows end users to set up and manage audio routes in a network of Dante-enabled devices. Audinate provides all licenced manufacturers with Dante Controller software on DVD with each Dante-enabled system sold.
End users of Dante-enabled products may register and download Dante Controller directly from this website as part of the...
Category: Audio / Utilities & Plug-Ins
Publisher: Audinate, License: Freeware, Price: USD $0.00, File Size: 42.6 MB
Platform: Windows
Orb is committed to giving you seamless access to all your media - where you want it, when you want it.
Orb Mini Controller is a standalone mini Controller for Mac or PC to control Orb Music, Orb TV or Orb BR from any computer. You can use the mini Controller instead of a Smart phone or even as a second Controller.
Category: Internet / Misc. Plugins
Publisher: Orb Networks Inc., License: Freeware, Price: USD $0.00, File Size: 14.6 MB
Platform: Windows
- IcomControl is a radio controller designed for the Icom PCR1000.
- IcomControl is a radio Controller designed for the Icom PCR1000.
- IcomControl is designed to be very easy to use.
- IcomControl has 400 easy-to-use memory locations.
- IcomControl uses plain-text data files, so importing and exporting data is easy also.
- IcomControl has advanced frequency Programming and scanning features.
Category: Audio / Utilities & Plug-Ins
Publisher: P. Lutus, License: Freeware, Price: USD $0.00, File Size: 427.0 KB
Platform: Windows
MCT 10 greatly reduces programming and commissioning times.
MCT 10 greatly reduces Programming and commissioning times.
Main Features:
- SyncPos Programming
- On-line and off-line commissioning
- On-board help files for each drive parameter
- Logging of alarms and warnings for improved system performance and documentation
- MCT-10 Conversion Wizards simplify drive conversion projects
...
Category: Utilities / Misc. Utilities
Publisher: Danfoss Drives, License: Freeware, Price: USD $0.00, File Size: 185.9 MB
Platform: Windows
Window Controller opens properly sized and aligned windows on both platforms and remembers window settings for every user.
Window Controller can manage a window by itself or as a role player in the Application Kit’s document-based architecture, which also includes NSDocument and NSDocumentController objects.
Windiw Controller's main functionality...
Category: Utilities / Misc. Utilities
Publisher: Mikhail Edoshin., License: Freeware, Price: USD $0.00, File Size: 34.4 KB
Platform: Windows
C2Prog is an industrial grade flash programming tool for TI C2000™ and MSP430™ MCUs.
C2Prog is an industrial grade flash Programming tool for TI C2000™ and MSP430™ MCUs. Rather than solely relying on JTAG as the communication interface between the Programming tool and the MCU, C2Prog also supports RS-232, RS-485, TCP/IP and CAN (Controller Area Network). The programmer is, therefore, well suited for deployment in the field where the JTAG port is...
Category: Internet / Misc. Servers
Publisher: Code Skin, License: Shareware, Price: USD $0.00, File Size: 0
Platform: Windows
The EFILive Tuning Tool can read the entire contents of an Engine Controller (ECM), Powertrain Controller (PCM), or Transmission Controller (TCM) and store it on your PC’s hard drive.Scripting allows tuners to create an automated change list to apply to a stock tune based on previously tuned file.The tuning data is displayed in easy to understand tables, charts or 3D...
Category: Business & Finance / Business Finance
Publisher: EFILive Limited, License: Demo, Price: USD $0.00, File Size: 88.7 MB
Platform: Windows
Machine control software that combines a graphical part program development, animation and verification into a powerful PC based machine tool Controller. Designed for the production environment with special considerations for safety and ease of use. G Code Controller incorporates features that you would expect from a sophisticated CNC Controller and then some, including...
Category: Business & Finance / Applications
Publisher: Ability Systems Corporation, License: Shareware, Price: USD $349.00, File Size: 1.1 MB
Platform: Windows
The application has an extensive Help system in English and German.
The application has an extensive Help system in English and German. Additional details concerning the bus controllers can be found in the corresponding user's manuals.
The toolbox is connected with the bus Controller over an Ethernet network. The PC on which the ModbusTCP toolbox is running must have network access (e.g. Intranet) to the Controller that should be...
Category: Internet / Monitoring
Publisher: Bernecker + Rainer, License: Freeware, Price: USD $0.00, File Size: 4.9 MB
Platform: Windows
Includes various tools : bad sector repair tool, test speed , S.M.A.R.T. information, surface test, check media stability and Controller test. Is the hard Disk drive monitoring and failure prediction and repairing software for repair and testing. It uses S.M.A.R.T. technology to monitor the health status of hard Disk drives, prevents data loss and predicts possible drive...
Category: Utilities
Publisher: Flobo Recovery, License: Shareware, Price: USD $39.00, File Size: 48.8 KB
Platform: Windows
The PC software Datalogging Viewer allows the evaluation of data, with a datalogging module recorded by a Controller. The datalogging module can be used in the Controller TROVIS 5500, WPR3 and SOL3. It records cyclically the essential operation informations (measuring values, rated values, states of inputs and outputs) of the Controller.
Category: Multimedia & Design / Graphics Viewers
Publisher: KT-Elektronik, License: Freeware, Price: USD $0.00, File Size: 2.6 MB
Platform: Windows
 |